How to optimize the computer system BIOS?

1, in the Standard CMOS Setup there is no connection compaq presario cq35-200 laptop keyboard IDE equipment of port TYPE and MODE set to None.

2, the CPU Internal Cache, External Cache set to Enabled, open the CPU 12 Cache.

3, will System Boot Up speed set to High. Make the system lead speed for high speed.

4, will Boot Sequence set to C, A:.

5, will Floopy Drive Seek At Boot set to Disable. Make start testing floppy drive.

6, will be Above 1 MB Memory Test set to Disabled. Start testing more than 1 MB of memory.

7, will Boot Up Floppy seek set to Disabled.compaq presario cq40 laptop keyboard Such doing can make right boot floppy disk to seek operation.

8, will Video BIOS Shadow set to Enabled. Make the BIOS on the display card is mapped into memory, improve the display speed.

9, will System BIOS Shadow set to Enabled. Make the system BIOS mapping memory and improve performance.

10, will Video BIOS Cacheable set to Enable. Make graphics the BIOS on the mapping to the cache.

11, will System BIOS Cacheable set to Enbaled. Make motherboard BIOS mapping to the cache.

12, will Cache Timing set to Fastset.

13, will SDRAM CAS Latency Time set to 3. SDRAM set of delay time. If your memory quality is not very good, put into 3 can make the system halted compaq presario cq40-100 laptop keyboard situation greatly reduced.

14, adopting VIA Apollo Pro series motherboard chip BIOS have a "DRAM CLOCK" will be the value to HCLK + 33, so your memory will work in outside the system frequency + and frequency, if your CPU for amdk6 series, the system performance increase will be very obvious, if your memory be disappointing, you but will "DRAM CLOCK" value set to "HOST CLK (outside the system frequency) or" HOST - 33 ". This is because the Apollo Pro series chip has a unique memory asynchronous technology.